ASTM Pipe

ASTM/ ASME SA53 Pipes

ASTM/ ASME SA53 Pipes is known for mechanical & pressure applications & it is also acceptable for ordinary uses such as steam, water, gases etc. It is suitable for welding & for forming operations involving coiling, bending & flanging.

Chemical Composition
 Grade AGrade B
Carbon0.250.30
Manganese0.951.20
Phosphorus0.050max0.050max
Sulfur0.045max0.045max
Copper0.40max0.40max
Nickel0.40max0.40max
Chromium0.40max0.40max
Molybdenum0.15max0.15max
Vanadium0.08max0.08max

Mechanical Properties
 Grade AGrade B
Tensile Strength48,000psi(min)60,000psi(min)
Yield Strength30,000psi(min)35,000psi(min)
 

ASTM/ ASME SA105 Pipes

ASTM/ ASME SA105 is used for chemical industry, shipbuilding, fertilizer equipment, electric industry, shipbuilding, petrochemical, pharmaceutical industry etc.

Chemical Composition
Carbon; 0.35max
Manganese; 0.60-1.05
Phosphorus; 0.035max
Sulfur; 0.040max
Silicon; 0.10-0.35
Copper; 0.40max
Nickel; 0.40max
Chromium; 0.30max
Molybdenum; 0.12max
Vanadium; 0.08max

ASTM/ ASME SA106 Pipes

ASTM/ ASME SA106 Pipes, is the standard specification for seamless carbon steel pipe for high temperature services. Commonly it is used for refineries & plants where gasses or fluids are transported at high temperature & pressure.

Chemical Composition
Grade AGrade BGrade C
Carbon0.25max0.30max0.35max
Manganese0.28-0.930.29-1.060.29-1.06
Phosphorus0.035max0.035max0.035max
Sulfur0.035max0.035max0.035max
Silicon0.10max0.10max0.10max
Chromium0.40max0.40max0.40max
Copper0.40max0.40max0.40max
Molybdenum0.15max0.15max0.15max
Nickel0.40max0.40max0.40max
Vanadium0.08max0.08max0.08max

ASTM/ ASME SA134 Pipes

ASTM/ ASME SA135 Pipes

Aesteiron Steels Pvt Ltd, is the leading suppliers of ASTM/ ASME SA135 Pipes.

Chemical Composition
ElementGrade AGrade B
Carbon0.25max0.30max
Silicon--
Manganese0.95max1.20max
Phosphorus0.050max0.050max
Sulfur0.060max0.060max

Mechanical Properties
 Yield StrengthTensile Strength 
Grade A207(Mpa)min331(Mpa)min
Grade B241(Mpa)min414(Mpa)min
 

ASTM/ ASME SA139 Pipes

ASTM/ ASME SA139 Pipes is used for the most critical engineering applications in the automotive sector. 

Chemical Composition
ElementGrade AGrade BGrade CGrade DGrade E
Carbon0.30max0.30max0.30max0.30max0.30max
Manganese1.00max1.00max1.20max1.30max1.40max
Phosphorus0.035max0.035max0.035max0.035max0.035max
Sulfur0.035max0.035max0.035max0.035max0.035max

Mechanical Properties 
ElementYield Strength(min)Tensile Strength(min)Elongation 2" (min)
Grade A30ksi, 205Mpa48ksi, 330Mpa35%
Grade B35ksi, 240Mpa60ksi, 415Mpa30%
Grade C42ksi, 290Mpa60ksi, 415Mpa25%
Grade D46ksi, 315Mpa60ksi, 415Mpa23%
Grade E52ksi, 360Mpa66ksi, 455Mpa22%
 

ASTM/ ASME SA211 Pipes

Aesteiron Steels Pvt Ltd, is one of the supplier of ASTM/ ASME SA211 Pipes

Chemical Composition
  • Carbon; 0.050-0.15
  • Chromium; 1.0-1.5
  • Iron; 96.05-97.71
  • Manganese; 0.30-0.60
  • Molybdenum; 0.44-0.65
  • Phosphorus; 0.025max
  • Silicon; 0.50-1.00
  • Sulfur; 0.025max

Mechanical Properties
  • Tensile Strength; 415Mpa, 60200psi
  • Yield Strength; 205Mpa, 29700psi
  • Elongation; 30%

ASTM/ ASME SA252 Pipes

ASTM/ ASME SA252 Pipes is used for low pressure liquid delivery such as water, oil & gas. piling & construction.

Chemical Composition
Phosphorus; 0.050max

Mechanical Properties
Tensile Strength(psi)Yield Strength
Grade 150,000 min30,000
Grade 260,000 min35,000
Grade 366,000 min45,000

ASTM/ ASME SA312 Pipes

ASTM/ ASME SA312 Pipes is used for a wide variety of applications such as plumbing to ducts.

Chemical Composition
 CarbonManganesePhosphorusSulfurSiliconChromiumNickelMolybdenumNiobiumTitanium
TP 3040.082.000.0450.0301.0018.0-20.08.0-11.0---
TP 304H0.04-0.102.000.0450.0301.0018.0-20.08.0-11.0---
TP 304L0.0352.000.0450.0301.0018.0-20.08.0-13.0---
TP 310S0.082.000.0450.0301.0024.0-26.019.0-22.00.75--
TP 3160.082.000.0450.0301.0016.0-18.011.0-14.02.00-3.00--
TP 316L0.0352.000.0450.0301.0016.0-18.010.0-14.02.00-3.00--
TP 316H0.04-0.102.000.0450.0301.0016.0-18.011.0-14.02.00-3.00--
TP 316Ti0.082.000.0450.0301.0016.0-18.010.0-14.02.00-3.000.105x(C+N)-0.70
TP 3210.082.000.0450.0301.0017.0-19.09.0-12.0-0.105C-0.70
TP 321H0.04-0.102.000.0450.0301.0017.0-19.09.0-12.0--4C-0.60
TP 3470.082.000.0450.0301.0017.0-19.09.0-13.0---
TP 347H0.04-0.102.000.0450.0301.0017.0-19.09.0-13.0---
 

ASTM/ ASME SA333 Pipes

ASTM/ ASME SA333 Pipes is widely used for low temperature services. 

Chemical Composition
GradeCarbonSiliconManganesePhosphorusSulfurChromiumNickelCopperMolybdenumVanadiumAluminium
Gr 1≤0.30-0.40-1.06≤0.025≤0.025------
Gr 3≤0.190.18-0.370.31-0.64≤0.025≤0.025-3.18-3.82----
Gr 4≤0.120.18-0.370.50-1.05≤0.025≤0.0250.44-1.010.47-0.980.40-0.75--0.40-0.30
Gr 6≤0.30≥0.100.29-1.06≤0.025≤0.025------
Gr 7≤0.190.13-0.32≤0.90≤0.025≤0.025-2.03-2.57----
Gr 8≤0.130.13-0.32≤0.90≤0.025≤0.025-8.40-9.60----
Gr 9≤0.20-0.40-1.06≤0.025≤0.0250.75-1.251.60-2.240.75-1.25---
Gr 10≤0.200.10-0.351.15-1.50≤0.030≤0.015≤0.015≤0.25≤0.015≤0.50≤0.12≤0.06
Gr 11≤0.10≤0.35≤0.60≤0.025≤0.025-35.0-37.0-≤0.50--

Mechanical Properties
GradeTensile Strength(Mpa)Yield Strength(Mpa)
Gr 1≥380≥205
Gr 3≥450≥240
Gr 4≥415≥240
Gr 6≥415≥240
Gr 7≥450≥240
Gr 8≥690≥515
Gr 9≥435≥315
Gr 10≥550≥450
Gr 11≥450≥240

 

ASTM/ ASME SA335 Pipes

ASTM/ ASME SA335 Pipes is mainly used for power plants, nuclear plants & industrial boilers etc.

Chemical Composition
GradeCarbonManganesePhosphorusSulfurSiliconChromiumMolybdenum
P50.15max0.30-0.600.025max0.025max0.50max4.00-6.000.45-0.65
P90.15max0.30-0.600.025max0.025max0.25-1.008.00-10.000.90-1.10
P110.05-0.150.30-0.600.025max0.025max0.50-1.001.00-1.500.44-0.65
P220.05-0.150.30-0.600.025max0.025max0.50max1.90-2.600.87-1.13
P910.08-0.120.30-0.600.020max0.010max0.20-0.508.00-9.500.85-1.05
 V 0.18-0.25N 0.03-0.07Ni 0.40maxAl 0.02maxCb 0.06-0.10Ti 0.01maxZr 0.01max

Mechanical Properties
GradeTensile Strength(Mpa)Yield Strength(Mpa)Elongation %
P5≥415≥205≥22
P9≥415≥220≥22
P11≥415≥205≥22
P22≥415≥205≥22
P91585-760≥415≥20

ASTM/ ASME SA369 Pipes

Aesteiron is the leading suppliers of ASTM/ ASME SA369 Pipes.

Chemical Composition

GradeCMnPSSiCrMo
FP10.10-0.200.30-0.800.0250.0250.10-0.50-0.44-0.65
FP20.30-0.610.30-0.610.0250.0250.10-0.300.50-0.810.44-0.65
FP50.150.30-0.600.0250.0250.504.00-6.000.45-0.65
FP90.150.30-0.600.0300.0300.50-1.008.00-10.00.90-1.10
FP110.05-0.150.30-0.600.0250.0250.50-1.001.00-1.500.44-0.65
FP120.05-0.150.30-0.600.0250.0250.500.80-1.250.44-0.65
FP210.05-0.150.30-0.600.0250.0250.502.65-3.350.80-1.60
FP220.05-0.150.30-0.600.0250.0250.501.90-2.600.87-1.13
FP910.08-0.120.30-0.600.0250.0250.20-0.508.00-9.500.85-1.05
FP920.07-0.130.30-0.600.0200.0100.0508.50-9.500.30-0.60

ASTM/ ASME SA376 Pipes

ASTM/ ASME SA376 Pipes, provides good corrosion resistance & it is non magnetic in nature. However when cold worked it accquires a slightly magnetic quality.

Chemical Composition
GradeCarbonManganese(max)Phosphorus(max)Sulfur(max)Silicon(max)NickelChromiumMolybdenumTantalumNitrogenOthers
TP3040.08max2.000.0450.0300.758.0-11.018.0-20.0---
TP304H0.04-0.102.000.0450.0300.758.0-11.018.0-20.0---
TP304N0.08max2.000.0450.0300.758.0-11.018.0-20.0-0.10-0.16-
TP304LN0.035max2.000.0450.0300.758.0-11.018.0-20.0-0.10-0.16-
TP3160.08max2.000.0450.0300.7511.0-14.016.0-18.02.0-3.0--
TP316H0.04-0.102.000.0450.0300.7511.0-14.016.0-18.02.0-3.0--
TP316N0.08max2.000.0450.0300.7511.0-14.016.0-18.02.0-3.00.10-0.16-
TP316LN0.035max2.000.0450.0300.7511.0-14.016.0-18.02.0-3.00.10-0.16-
TP3210.08max2.000.0450.0300.759.0-13.017.0-19.0---
TP321H0.04-0.102.000.0450.0300.759.0-13.017.0-19.0---
TP3470.08max2.000.0450.0300.759.0-13.017.0-19.0---
TP347H0.04-0.102.000.0450.0300.759.0-13.017.0-19.0---
TP3480.08max2.000.0450.0300.759.0-13.017.0-19.0-0.10-Co 0.20max

ASTM/ ASME SA381 Pipes

ASTM/ ASME SA405 Pipes

ASTM/ ASME SA405 Pipes is commonly used for annealing boxes, steam nozzels, quenching racks & patitions .

Chemical Composition
Aluminium; 0.1-0.3
Carbon; 0.08max
Chromium; 11.5-14.5
Iron; Bal
Manganese; 1.00max
Nickel; 0.5max
Phosphorus; 0.04max
Silicon; 1.00max
Sulphur; 0.03max

Mechanical Properties
Tensile Strength; 448Mpa, 65000psi
Yield Strength; 276Mpa, 40000psi
Elongation(in 50mm); 25%

ASTM/ ASME SA409 Pipes

ASTM/ ASME SA409 Pipes is especially used for applications where oxidation of carbon steels is needed. Its applications are automotive & truck exhaust systems, including tubular manifolds & heat exchangers, gas turbine exhaust silencers. 

Chemical Composition
Carbon; 0.03max
Manganese; 1.00max
Phosphorus; 0.040max
Sulfur; 0.02max
Silicon; 1.00max
Chromium; 10.50-11.70
Nickel; 0.50max
Nitrogen; 0.03max
Titanium; 8x(C+N)min 0.15-0.50 

Mechanical Properties
Tensile Strength; 55(ksi)min
0.2% Yield Strength; 25(ksi)min
Elongation(% in 2") ; 20min
Hardness, Rockwell; B88max

ASTM/ ASME SA426 Pipes

Aesteiron Steels Pvt Ltd, is the leading manufacturers of ASTM/ ASME SA426 Pipes.

Chemical Composition
GradeCP1CP2CP5CP5bCP9CP11CP12CP15CP21CP22CPCA15
Carbon0.25max0.10-0.200.20max0.15max0.20max0.05-0.200.05-0.150.15max0.05-0.150.05-0.150.15max
Manganese0.30-0.800.30-0.610.30-0.700.30-0.600.30-0.650.30-0.800.30-0.610.30-0.600.30-0.600.30-0.701.00max
Phosphorus0.040max0.040max0.040max0.040max0.040max0.040max0.040max0.040max0.040max0.040max0.040max
Sulfur0.045max0.045max0.045max0.045max0.045max0.045max0.045max0.045max0.045max0.045max0.045max
Silicon0.10-0.500.10-0.500.75max1.00-2.000.25-1.000.60max0.50max0.15-1.650.50max0.60max1.50max
Chromium-0.50-0.814.00-6.504.00-6.008.00-10.001.00-1.500.80-1.25-2.65-3.352.00-2.7511.5-14.0
Molybdenum0.44-0.650.44-0.650.45-0.650.45-0.650.90-1.200.44-0.650.44-0.650.44-0.650.80-1.060.90-1.200.50max

 

ASTM/ ASME SA430 Pipes

ASTM/ ASME SA430 Pipes, is a corrosion & heat resisting grade & find application in areas where mildly corrosive conditions occur or where scaling resistance at moderate temperature is required.

Applications
Automotive trim
Architectural applications such as industrial roofing & wall clading
Kitchen utensils 
Washing Machine Parts & industrial pipe & tube
Material handling equipment in the minning & sugar industry.

Chemical Composition
Carbon; 0.12max
Manganese; 1.00max
Phosphorus; 0.045max
Sulfur; 0.030max
Silicon; 1.00max
Chromium; 16.0-18.0

Mechanical Properties
Tensile Strength; 530Mpa
0.2% Proof Strength; 360Mpa
Elongation; 25%
Hardness; 160

ASTM/ ASME SA450 Tubes

ASTM/ ASME SA451 Pipes

ASTM/ ASME SA451 Pipes covers austenitic alloy steel pipe which is used for high temperature, corrosive & nuclear pressure services. 

Chemical Composition
 CPF3CPF3ACPF8CPF8ACPF3MCPF8MCPF10MCCPF8CCPF8C(Ta max)CPH8CPH20/CPH10CPK20CPE20N
C(max)0.030.030.080.080.080.080.080.080.080.080.20.20.2
Mn(max)1.501.501.501.501.501.501.501.501.501.501.501.501.50
P(max)0.0400.0400.0400.0400.0400.0400.0400.0400.0400.0400.0400.0400.040
S(max)0.0400.0400.0400.0400.0400.0400.0400.0400.0400.0400.0400.0400.040
Si(max)2.002.002.002.001.501.501.502.002.001.502.001.751.50
Ni8.0-12.08.0-12.08.0-12.08.0-12.09.0-13.09.0-13.013.0-16.09.0-12.09.0-12.012.0-15.012.0-15.019-228.0-11.0
Cr17.0-21.017.0-21.017.0-21.017.0-21.017.0-21.018.0-21.015.0-18.018.0-21.018.0-21.022.0-26.022.0-26.023.0-27.023.0-26.0
Mo----2.0-3.02.0-3.01.75-2.25------
Nb------≤1.2 ≥10xC≤1  ≥8xC≤1  ≥8xC----
Ta--------0.1----
N------------0.08-0.20
 

ASTM/ ASME SA452 Pipes

ASTM/ ASME SA523 Pipes

ASTM/ ASME SA523 Pipes cover electric resistance weld steel pipe which is used for conduit for the installation of high pressure pipe. This is useful for welding & for forming operations, including operations,

Chemical Composition
Grade A SMLSGrade A ERWGrade B SMLSGrade B ERW
Carbon0.22-0.250.21-0.250.27-0.300.26-0.30
Manganese0.90-0.950.90-0.951.15-1.201.15-1.20
Phosphorus0.035-0.450.035-0.450.035-0.0450.035-0.045
Sulfur0.050-0.0600.050-0.0600.050-0.0600.050-0.060

Mechanical Properties
SMLS & ERWGrade AGrade B
Tensile Strength, (psi)min48,00060,000
Yield Strength, (psi)min30,00035,000

ASTM/ ASME SA524 Pipes

ASTM/ ASME SA524 Pipes is a low carbon steel pipes & it is known for mild steel pipes & tubes. It can be easily form in any shapes with low cost. It is not hard as high carbon steel pipes.

Chemical Composition
Carbon; 0.21max
Silicon; 0.10-0.40
Manganese; 0.90-1.35
Phosphorus; 0.035max
Sulfur; 0.035max

Mechanical Properties
Tensile Strength(min); 414Mpa, 586Mpa 
Elongation; 30%min

ASTM/ ASME SA530 Pipes

ASTM A213 Grade T22 Alloy Tube
  • sa213 t22 specification
  • sa213 t22 temperature
  • asme sa213 specification
  • sa213 t11 properties

ASTM/ ASME SA587 Pipes

ASTM/ ASME SA587 is an Electric Resistance Welded Low Carbon Steel Pipe specially used for chemical industries.

Chemical Composition
Carbon; 0.15max
Manganese; 0.270.63
Phosphorus; 0.035max
Sulfur; 0.035max
Aluminium; 0.02-0.100

Mechanical Properties
Tensile Strength(min); 48,000psi, 331Mpa
Yield Strength(min); 30,000psi, 207Mpa
Elongation(in 2" or 50mm); 40%min

ASTM/ ASME SA589 Pipes

ASTM/ ASME SA660 Pipes

ASTM/ ASME SA671 Pipes

ASTM/ ASME SA671 is an electric fusion welded steel pipe. It is typically used for gas, water & conveying oil.

Chemical Composition
Steel gradeChemical composition
CSiMnPSTi
CA55/A550.280.13-0.450.980.0350.035-
B550.20.13-0.450.980.0350.035
CB60/B600.240.13-0.450.980.0350.035
CB65/B650.280.13-0.450.980.0350.035
CB70/C700.310.13-0.451.300.0350.035
C55-/0.180.13-0.450.550.0350.035
CC60/C600.210.13-0.45~0.980.0350.035
CC65/C650.240.13-0.450.790.0350.035
CC70/C700.270.13-0.45~1.300.0350.035

Mechanical Properties
Steel gradeYield Strength (N/mm2)Tensile Strength (N/mm2)Elongation(%)
CA55/A55205380-51527
B55205380-51527
CB60/B60220415-55025
CB65/B65240450-58523
CB70/C70260485-62021
C55205380-51527
CC60/C60220415-55025
CC65/C65240450-58523
CC70/C70260485-62021
 

ASTM/ ASME SA672 Pipes

ASTM/ ASME SA672 is commonly used for power plants, oil & gas, ships & boilers. It is highly appreciated for its durability, corrosion resistance & dimensional accuracy.

Chemical Composition
Steel gradeChemical composition
CSiMnPSTi
CA55/A550.280.13-0.450.980.0350.035-
B550.20.13-0.450.980.0350.035
CB60/B600.240.13-0.450.980.0350.035
CB65/B650.280.13-0.450.980.0350.035
CB70/C700.310.13-0.451.300.0350.035
C55-/0.180.13-0.450.550.0350.035
CC60/C600.210.13-0.45~0.980.0350.035
CC65/C650.240.13-0.450.790.0350.035
CC70/C700.270.13-0.45~1.300.0350.035

Mechanical Properties
Steel gradeYield Strength (N/mm2)Tensile Strength (N/mm2)Elongation(%)
CA55/A55205380-51527
B55205380-51527
CB60/B60220415-55025
CB65/B65240450-58523
CB70/C70260485-62021
C55205380-51527
CC60/C60220415-55025
CC65/C65240450-58523
CC70/C70260485-62021

ASTM/ ASME SA691 Pipes

ASTM/ ASME SA69, has properties such as good hardenability, wear resistance, corrosion resistance, strength & toughness. It is commonly used for applications such as petrochemical industries, cement industries, nuclear power plant, oil & gas industries. offshore industries etc.

Chemical Composition
Steel GradesCarbonManganesePhosphorusSulfurSiliconChromiumMolybdenumVanadium
1 CR0.05-0.170.40-0.650.0250.0250.15-0.400.80-1.150.45-0.60-
1-1/4CR0.05-0.170.40-0.650.0250.0250.50-0.801.00-1.500.45-0.65-
2-1/4CR0.05-0.150.30-0.600.0250.0250.502.00-2.500.90-1.10-
5 CR0.150.30-0.600.0250.0250.504.00-6.000.45-0.65-
9 CR0.150.30-0.600.0250.0251.008.00-10.00.90-1.100.04
910.08-0.120.30-0.600.0200.0100.20-0.508.00-9.500.85-1.050.18-0.25

Mechanical Properties
Steel GradesTensile Strength, MpaYield Strength, MpaElongation(50mm % min) 
1 CR380-550230min22
1-1/4CR415-585240min22
2-1/4CR415-585205min18
5 CR415-585205min18
9 CR415-585205min18
91415-585205min18
 

ASTM/ ASME SA714 Pipes

ASTM/ ASME SA714 is a high strength low alloy welded & seamless pipe covers standard requirements for seamless & welded high strength low alloy steel pipe.

Chemical Composition
GradesGr 1Gr 2Gr 3Gr 4Gr 5Gr 6Gr 7Gr 8
Carbon0.26max0.26max0.27max0.13max0.20max0.18max0.15max0.23max
Manganese1.30max1.30max1.40max0.65max0.35-1.060.45-1.050.17-0.530.74-1.31
Phosphorus-0.05max0.05max 0.045max0.045max-0.05max
Sulfur0.063max0.063max0.060max0.060max-0.055max0.06max0.06max
Silicon-0.33max0.35max---0.20-0.800.25-0.70
Copper0.18min0.18min0.18min0.22-0.48-0.27-1.030.22-0.580.22-0.43
Vanadium-0.01min0.01min----0.01-0.11
Nickel---0.17-0.531.60-2.240.35-1.150.68max0.43max
Chromium---0.74-1.26-0.09-0.21--
Molybdenum---0.09-0.21----

ASTM/ ASME SA727 Pipes

ASTM/ ASME SA731 Pipes

ASTM/ ASME SA733 Pipes

ASTM/ ASME SA 789 Pipes

Chemical Composition
GradeCSi,maxMn,maxP, maxS, maxNiCrMo
3040.08max0.752.000.0450.0308.00-16.018.0-20.0-
304H0.04-0.100.752.000.0450.0308.00-16.018.0-20.0-
304L0.035max0.752.000.0450.0308.00-13.018.0-20.0-
304N0.08max0.752.000.0450.0308.00-11.018.0-20.0-
304LN0.035max0.752.000.0450.0308.00-11.018.0-20.0-
304Cb0.08max0.752.000.0450.03012.0-16.022.0-24.00.75max
309S0.08max0.752.000.0450.03012.0-15.022.0-24.00.75max
310Cb0.08max0.752.000.0450.03019.0-22.024.0-26.00.75max
310S0.08max0.752.000.0450.03019.0-22.024.0-26.00.75max
3160.08max0.752.000.0450.03010.0-14.016.0-18.02.00-3.00
316H0.04-0.100.752.000.0450.03010.0-14.016.0-18.02.00-3.00
316L0.035max0.752.000.0450.03010.0-14.016.0-18.02.00-3.00
316N0.035max0.752.000.0450.03010.0-14.016.0-18.02.00-3.00
316LN0.035max0.752.000.0450.03010.0-14.016.0-18.02.00-3.00
3170.08max0.752.000.0450.03011.0-15.018.0-20.03.00-4.00
317L0.035max0.752.000.0450.03011.0-15.018.0-20.03.00-4.00
3210.08max0.752.000.0450.0309.0-13.017.0-20.0-
321H0.04-0.100.752.000.0450.0309.0-13.017.0-20.0-
3470.08max0.752.000.0450.0309.0-13.017.0-20.0-
347H0.04-0.100.752.000.0450.0309.0-13.017.0-20.0-
3480.08max0.752.000.0450.0309.0-13.017.0-20.0-
348H0.04-0.100.752.000.0450.0309.0-13.017.0-20.0-

ASTM/ ASME SA795 Pipes

Aesteiron Steels Pvt Ltd, is one of the leading manufacturers of ASTM/ ASME SA795 Pipes.

Chemical Composition
GradesCarbonManganesePhosphorusSulfur
Grade A0.250.950.0350.035
Grade B0.301.200.0350.035

ASTM/ ASME SA 813 Pipes

Chemical Composition
GrCMn(max)Ph(max)S(max)Si(max)CrNiMoNbTi
3040.082.000.0450.030118.0-20.08.0-11.0---
304H0.04-0.102.000.0450.030118.0-20.08.0-11.0---
304L0.0352.000.0450.030118.0-20.08.0-13.0---
310S0.082.000.0450.030124.0-26.019.0-22.00.75--
3160.082.000.0450.030116.0-18.011.0-14.02.00-3.00--
316L0.0352.000.0450.030116.0-18.010.0-14.02.00-3.00--
316H0.04-0.102.000.0450.030116.0-18.011.0-14.02.00-3.00--
316Ti0.082.000.0450.030116.0-18.010.0-14.02.00-3.000.15x(C+N)-0.70
3210.082.000.0450.030117.0-19.09.0-12.0-0.15C-0.70
321H0.04-0.102.000.0450.030117.0-19.09.0-12.0--4C-0.60
3470.082.000.0450.030117.0-19.09.0-13.0---
347H0.04-0.102.000.0450.030117.0-19.09.0-13.0-- 

ASTM/ ASME SA 814 Pipes

Chemical Composition 
GradeCSi,maxMn,maxP, maxS, maxNiCrMo
3040.08max0.752.000.0450.0308.00-16.018.0-20.0-
304H0.04-0.100.752.000.0450.0308.00-16.018.0-20.0-
304L0.035max0.752.000.0450.0308.00-13.018.0-20.0-
304N0.08max0.752.000.0450.0308.00-11.018.0-20.0-
304LN0.035max0.752.000.0450.0308.00-11.018.0-20.0-
304Cb0.08max0.752.000.0450.03012.0-16.022.0-24.00.75max
309S0.08max0.752.000.0450.03012.0-15.022.0-24.00.75max
310Cb0.08max0.752.000.0450.03019.0-22.024.0-26.00.75max
310S0.08max0.752.000.0450.03019.0-22.024.0-26.00.75max
3160.08max0.752.000.0450.03010.0-14.016.0-18.02.00-3.00
316H0.04-0.100.752.000.0450.03010.0-14.016.0-18.02.00-3.00
316L0.035max0.752.000.0450.03010.0-14.016.0-18.02.00-3.00
316N0.035max0.752.000.0450.03010.0-14.016.0-18.02.00-3.00
316LN0.035max0.752.000.0450.03010.0-14.016.0-18.02.00-3.00
3170.08max0.752.000.0450.03011.0-15.018.0-20.03.00-4.00
317L0.035max0.752.000.0450.03011.0-15.018.0-20.03.00-4.00
3210.08max0.752.000.0450.0309.0-13.017.0-20.0-
321H0.04-0.100.752.000.0450.0309.0-13.017.0-20.0-
3470.08max0.752.000.0450.0309.0-13.017.0-20.0-
347H0.04-0.100.752.000.0450.0309.0-13.017.0-20.0-
3480.08max0.752.000.0450.0309.0-13.017.0-20.0-
348H0.04-0.100.752.000.0450.0309.0-13.017.0-20.0-

ASTM/ ASME SA 836 Pipes

Aesteiron Steels Pvt Ltd, is one of the leading manufacturers of ASTM/ ASME SA 836 Pipes.

Chemical Composition
Carbon; 0.2max
Manganese; 0.9max
Phosphorus; 0.05max
Silicon; 0.35max
Sulfur; 0.05max
Titanium; 1.00max

Mechanical Properties
Tensile Strength(ksi)Mpa; (55)380
Yield Strength(ksi)Mpa; (25)175
Elongation in 2" in (50mm)min; 22
Reduction of area,min; 35%
Looking for ASTM Pipe ?
© Aesteiron Steels Private Limited
 
Desktop Site Back to top